Back Workout of the Week (BWOW): Week 1 – Building the Strength Base
Posted: February 10, 2012 Filed under: 00 - Lifting Tips, 30 - Back Workout of the Week!, 90 - Brute Force | Tags: Back Strength, Back Training, ILS, Lats, Muscle Building, Power, Powerlifting, Strength 3 Comments »
Why is strengthening my back important? To the less educated, a big upper body means large pecs and (unfortunately) large biceps. In fact, your back consists of a larger group of muscles than your chest, and quite frankly it is a massive back that lets you blot out the sun as you step through a doorway.
But that’s not why we emphasize the back at Brute Force. If you read What Is Brute Force, you recall that rule #2 is to follow a balanced training program. Your back (pulling exercises) needs to balance out your pecs (pushing exercises). More importantly a strong back results in bigger lifts.
Bench Press: Your lats are the foundation you press from. Build strong lats and you’ll feel like you’re pressing off a granite table.
Squat: A strong back will help prevent you from crumpling when you hit the hole with a massive load on your back. Although a leg exercise, where does the bar rest during the squat? On your back!
Deadlift: Your back anchors the weight and is the transition point between the weight hanging from your arms and your power base driving down through the floor.
Brute Force approach to back training:
As with other Brute Force workouts, working your back is meant to be simple and straightforward. Focus is on the horizontal/transverse plane, and emphasis is on your basic compound lifts (again, rule #2) – lots of rows. This workout is intended to maximize the carryover to your bench press.
BWOW – Week 1:
Goal: Building a Strength Base – move as much weight as you can with good form
- Warm up to your working sets
- 5 sets/4 repetitions per set
- Select a weight where you are using nearly maximum effort to complete your reps, additional reps would require cheating
- Minimize cheating – avoid using upper body momentum to complete your reps
- Use wrist straps if necessary to hold the bar
- Rest between sets should be sufficient to fully recover (3-5 minutes); emphasis is on building strength, not conditioning
- 3 sets/6 reps per set
- Select a weight where you are using maximum effort to complete the set, you should be unable to complete more than the specified reps
- Use wrist straps if necessary to hold the dumbbells
- Rest between sets should be sufficient to fully recover
Cable Rows:
- 3 sets/6 reps per set
- Select a weight where you are using maximum effort to complete the set
- Minimize cheating – rocking back using momentum to complete the reps
- Squeeze the weight tightly with your back at the top for a moment before lowering it between reps
- Rest between sets should be sufficient to fully recover
- 3 sets to failure; use spotter assistance or an assisted pull-up machine if you cannot complete 6 reps
- Pull-ups should be extremely challenging after smoking your back and biceps with 11 sets of rows at a high intensity
- If you can still complete more than 8 reps, either you are a hero, or you didn’t push yourself hard enough on your rows; in either case do your pull-ups with extra weight
Hammer Curls:
- 3 sets/10 reps per set
- As with pull-ups, you will have to drop the weight from your normal bicep workout, your biceps should be spent by now
- Hammer curls are meant to work your biceps – don’t use your whole body to complete the reps; if you can’t do the work with your biceps drop the weight
Brute Force Strength Training Review – The Squat
Posted: February 6, 2012 Filed under: 00 - Lifting Tips, 01 - Squat Tips, 95 - Brute Force Lifting Reviews | Tags: Leg Strength, Power, Powerlifting, Squat Technique, Squat Training, Squats, Strength Leave a comment »
Last week I took a look at a friend’s deadlifts (Jamie Orr, Red Deer, Canada). This week he sent me a video of his latest squat session:
JO: Hey Ken, appreciated the pointers last time on the DL. When/if you have time could you look at my squat? This one is 405 REALLY happy with first rep. Will send another at 365lbs, I feel the form is better. I am on a bit of a high today, I was pretty happy with these last sets. As I said, due to a year of crossfit “air squats” I was pretty happy getting 405. Seriously, I have done 3 weeks of leg press to get used to heavy leg workouts and yesterday was my first real squat day in over a year.
I know I step back too far, and I think my head dips.
Thanks, Jamie
Your squats actually look better than your deadlifts. They are very sound. On the ‘Crappy to Great Scale’, they are a solid ‘Ok’. I would give you a ‘Good’, but they are slightly high, and I don’t care if everything else is perfect, I’m not giving a Good to a high squat. We’ll get to that though.
Before you step under the bar…
Let’s start with your shoes. They look like standard runners, right? When you hit about 315lbs the heels start compressing, which can really screw with your stability. If you’re not competing, you don’t need an expensive pair of squat shoes (although I absolutely love mine), but you do need to replace the runners. Some options:
- Squat without shoes – better than using runners, but you won’t have any ankle or foot support.
- Wrestling shoes or Converse ‘Chucks’ – descent stability, and flat soles that won’t compress. Chucks are probably the better choice, as wrestling shoes have a very narrow sole that will give you less stability. They’re also a bit less expensive.
- Hiking boots – I used to really like squatting in boots. Your heels are a bit higher, great ankle support, and just plain solid. When you plant your foot, it is planted. They’re not, however, legal in competition.
Setting up…
You rush your setup. As soon as the bar comes out of the rack, you’re running back to squat. A good setup positions you for a great squat.
Pointers on setting up:
- You do have proper bar placement for heavy squats. It’s resting on your delts, not your traps, which is a good position for power.
- I would prefer the rack height slightly lower. That can be difficult, depending on the type of rack you have because the next position down is likely too low. I like the rack set up where the bar comes in about halfway between the nipples and top of the pecs when you step up to the bar. You may see if the gym has any extra floor mats (solid flooring mats, not something that will compress under your weight), to bring you up another inch or so.
- Before lifting out of the rack, drive your hips forward so they are directly underneath the bar. This allows you to use all leg drive to unrack the bar, reducing lower back work, and makes the bar feel considerably lighter coming out of the rack.
- Slow your setup down, control it coming out of the rack, just as you do your reps:
- Take a deep breath into your chest, drive your hips forward and raise the bar straight up. Lock out before stepping back.
- Take one short step straight back, next foot moves back even with the first and out to the side, toes pointed out. First foot moves straight out, and toes point out (two step walkout is slightly different).
- Lock back out, and take small breaths until you’re ready to begin the first rep.
- I would recommend a slightly narrower stance – 1-2″. Although ‘’wide stance’ is commonly considered a powerlifting stance, I don’t necessarily recommend a wide stance in most cases. I think you’ll get more power out of your glutes and hams by bringing your stance in a bit. Wide stance make sense in certain situations:
- If you’re squatting in federations that allow heavy lifting duty gear and use of monolift, the shorter range of motion can lead to bigger numbers.
- If you have proportionately long thighs, a narrower stance will force your hips to shift farther backwards, and cause you to lean. A wider stance can alleviate this.
- You do point your toes out – which is good. This allows your knees to track outward, making it much easier to drop below parallel.
- You’re not completely locked out before starting your first rep. You’re leaning slightly forward, and your knees aren’t locked out.
Squatting…
Your squats doo look pretty strong, only a couple of minor things I saw:
You lean forward slightly. It’s not too bad, but this will make hitting depth harder. A couple things that may help you reduce your lean:
- Keep your head up. I didn’t notice an exaggerated head dip, but your body will follow your eyes – if you are looking down you will have a greater tendency to lean. Squatting in front of a mirror can exacerbate the problem. The motion in the mirror draws your attention, making it more difficult to keep your head up.
- Breathing – since your spotter makes the comment ‘take that breath and hold it’ I assume your breathing isn’t perfect. Breathe in deeply before starting your descent, and hold it until you’re on your way back up. I like to begin exhaling in a controlled fashion once I’ve passed the ‘sticking point’. Breath control can be very important for stability. Keeping your chest full of air and your abs tight can give you upper body stability and reduce your tendency to lean.
- When I see high squats and leaning, I watch the knees. If you allow them to cave inward, your hips shift backwards. This forces you to lean in compensation and miss depth. Your knees look like they stay out through the reps – which is good.
Squat is slightly high
- Depth isn’t too bad, but about 1-2″ above parallel. You have plenty of strength at a good weight – don’t be afraid to sink they weight. Fixing the leaning mentioned above will make hitting depth much easier.
All in all, a very OK squats at a pretty heavy weight. I looked at the 365lb squats as well. Although the lighter squats were executed more explosively, your 405lb squats were just as solid as your 365lb squats. I don’t really have additional comments on the other video.
Recommendations for next week:
- Fix all the setup issues I mentioned. You should be able to do that perfectly on every set – you have the time to think about everything you do during setup.
- Set up so you’re not looking at the mirror while you squat.
- Bring your feet in 2″. Watch your feet as you walk out, and place them just slightly wider than shoulder width.
- Control your breathing throughout each rep of each set.
- Pick a spot on the ceiling, and keep your head up, eyes on that spot throughout each rep of every set.
For more information, here is a complete walk through of (power) squatting technique.
If you have a lift you’d like reviewed, leave a comment with a link to a video of your lift.
Brute Force Strength Training Review – The Deadlift
Posted: January 27, 2012 Filed under: 00 - Lifting Tips, 03 - Deadlift Tips, 95 - Brute Force Lifting Reviews | Tags: Deadlift Strength, Deadlift Technique, Deadlifts, Leg Strength, Muscle Building, Power, Powerlifting, Strength Leave a comment »A friend of mine mentioned he’d taken a video of his deadlift, and was wondering how tight his form was. Although on a scale from CRAPPY to GREAT, the lift was between NOT BAD and OK, I passed on a few pointers that I thought might bump him up to GOOD. Since even OK is better than 90% of the deadlifters you see in the gym, I asked if I could share these insights with all of you.
JO: Nah, go ahead. Since it’s not TOTALLY bad [I did mention it was almost OK didn’t I?], I don’t mind, send me a link to blog.
JO Deadlift Video
ME: Ok, it actually doesn’t look bad [NOT BAD], your starting position is really good, your back is flat, and your hips are down right where they should be to start. I do have a few comments:
On the setup for your first rep, you camp out at the bottom before lifting. This is bad for a couple reasons. First of all the deadlift can be downright intimidating. If you take enough time to think about it, it will talk you out of the lift, particularly as the bar gets heavier. Don’t mess around with your deadlift. Get setup and pull (grip and rip). Secondly, you don’t have an eccentric component to the (first rep) of a deadlift. Use your setup as an eccentric, tightening your glutes and hams as you drop into position. To keep from loosening up once your hips drop in, start the pull as soon as you hit the bottom.
It’s somewhat hard to tell from the angle of the video, but it looks like your feet are too wide for a conventional deadlift, yet too narrow for sumo. If you’re pulling conventional, your feet should be inside hip width, and your hands at shoulder width, so your hands will never drag across your thighs. If you’re lifting sumo, go as wide as you can with your feet. I usually have my shins right at the rings on the bar (assuming it is a standard power bar). Your hands are also at shoulder width, inside your legs, they only should drag across your legs at the hip. Notice that regardless of the style, your arms should hang straight down to the bar and minimize contact with your legs. In the video it looks like your hands slide up your legs all the way from the floor to lock out – the worst possible scenario.
JO: I had a couple powerlifters taking the video and they were saying I need to get back on my heels a bit and something about using my hams more as I get past my knees.
ME: I’ve never heard it put quite like that (using my hams more as I get past my knees), but I can sort of see what they are talking about. Once the bar crosses your knees, it appears like you’re using all lower back to finish off the lift. You are starting out the lift OK to GOOD (hips don’t come up ahead of the bar), so after the bar passes the knees, try to think ‘hip thrust’. Drive the hips forward instead of pulling back with the lower back. You’ll get a lot more drive out of your hamstrings, and even more out of your glutes to finish it off.
Good mornings might be a great supplemental exercise to help you with this. When I do good mornings, it’s not just bending down at the waist and pulling back up with my lower back. I start by moving my hips straight back, and the bar descends as I do. On the way back up, I start the lift by pulling with my hamstrings and finish it by driving my hips forward powerfully – it’s a great supplemental exercise for developing a bigger pull.
JO: My hands are wide and perhaps my stance is too. But I don’t THINK my hands touch my legs at all, due to the wide grip.
ME: From the video it looked like your hands were right at your shins, albeit maybe right outside. I don’t know if you saw it, but here’s a blog post that touches on hand position during the deadlift: http://bruteforcestrength.com/2011/12/from-the-refs-chair-the-deadlift/
As far as ‘back on the heels’, what I focus more on is ‘rocking back’ as I set up until my shoulders are at or behind the bar. In this lift you are in that position, but the bar is a bit too far forward before you start, and your knees end up in front of the bar once you are set up. Try bringing the bar back to where it’s over the center of your feet (probably an inch from your shins), then sit in/rock back until your shoulders are behind the bar – then you have no choice but to be over your heels.
I have one final comment. Notice how you squat down to the bar to set up and between each rep. This is the most common way of setting up for a deadlift, but I prefer a different approach. Instead of squatting to the bar, I bend at the waist to grab the bar. Once I have the bar, I tighten my upper back and pull the slack out between my body and the bar. I’m then completely tight and rock back, bringing my hips down and chest up, keeping tension on the bar. As my hips hit depth I PULL! This approach has a couple of advantages:
- When squatting down to the bar, most lifters I watch loosen their upper back and arms. When rocking backward into the setup you keep tension on the bar and don’t loosen up your upper back
- If you deadlift as shown in the video, I will guarantee that the second and subsequent reps are much easier than the first. This goes back to the fact that your first rep has no eccentric component. As a competitive powerlifter, I only have one rep in competition, so I try to treat every rep as the first one, creating an eccentric in the setup motion.
Hope this helps!
JO: Glad to know you didn’t laugh (or weep).
And I hope this review can help all of you move farther up the CRAPPY–GREAT scale. If you have a lift you’d like me to review as well, feel free to contact me at ken.gack@bruteforcestrength.com.
For more information on deadlift technique:
Leg Training – Brute Force Style
Posted: January 21, 2012 Filed under: 01 - Squat Tips, 90 - Brute Force | Tags: Leg Strength, Leg Training, Muscle Building, Power, Powerlifting, Strength Leave a comment »
I was at the gym a while back, and a guy there was asking me questions about bench pressing. I had questions of my own – so naturally the subject of leg workouts came up. ‘I don’t squat because of my knees and back’, he says. I’m obligated to ask… ‘What’s wrong with your knees and back?’ ‘Nothing,’ he replies, ‘my uncle, who’s a powerlifting bodybuilder said squats are bad for them’.
How do you argue with a powerlifting bodybuilder uncle? Now I’m not going to tell you why you need to work your legs, which, for the record consist of over 50% of the total muscle mass in your body. If you’re happy covering your sticks up in your sweats, while casually distracting onlookers with the biceps you shower with hours of bicep curl attention, then this article is not for you.
If, however, you’d like to wear a pair of shorts occasionally, then let’s do this right!
- Balance: Too many leg workouts are actually quad workouts thinly disguised with the token leg curl exercise thrown in at the end. An effective leg training plan balances your quad training with your posterior chain work.
- Emphasize Compound Exercises: Particularly for novices, the majority of your leg training (70-80%) should consist of compound lifts*.
*A compound lift is an exercise that uses multiple muscle groups to complete the work, as opposed to isolation lifts which isolate an individual muscle (example: the squat is a compound exercise that works the entire lower body strenuously, whereas leg curls isolate the hamstrings).
- Focus on Technique: Performing your exercise with proper technique minimizes your risk of injury, and maximizes the effectiveness of the exercise.
Putting it all Together
An effective leg training program doesn’t have to be complicated. Three ‘simple’ exercises will leave you hobbling out of the gym feeling completely wasted – that is the goal, right?
- Squat: Performed properly, squats anchor an effective leg workout. A proper set of squats hammers every muscle in your lower body, taxes your core, and strains your central nervous system. To do them right, you need to take them all the way into the hole. Above parallel, the squat over-emphasizes your quads. You need to drop your hips below parallel to get maximum activation of your glutes.
Squatting at the IPF World Championships
- Leg Press: Leg presses let you push some serious weight to isolate the lower body muscles you’ve already exhausted under the squat bar. When done right, your quads will be on fire at the end of each set. If they’re not on fire, keep on repping. As with the squats, leg presses need to be completed with the full range of motion – bring that platform down until your knees are pressing into your chest.
- Stiff-Leg Deadlift: Stiff-leg deadlifts, or romanian deadlifts are, in my humble but correct opinion, the best exercise there is for your posterior chain. They will help you build powerful glutes and hamstrings. To hit the hamstrings hard, keep your knees completely straight and slowly stretch down as far as possible before snapping it back up powerfully.
If you still feel the need to hit the machines to isolate your quads or hamstrings after the big three, it’s likely you’re doing something wrong…
Exercise Technique: Here are some simple pointers to make sure you’re performing these key lifts properly:
Positioning the Bar for a Bigger Bench Press
Posted: January 16, 2012 Filed under: 00 - Lifting Tips, 02 - Bench Press Tips | Tags: Bench Press, Bench Press Technique, Chest Strength, Power, Powerlifting, Strength Leave a comment »Although it appears a very simple exercise, there is a lot more to the bench press than lowering the bar to your chest and pressing it back up. Applied correctly, small tweaks in your lifting technique can have a much greater impact on your bench than the workout routine you follow. Often overlooked during the bench press is the bar position.
Notice two problems with the bench press shown in this photo?
If you said the issues are that I couldn’t get the spotter to get his dang hands off the bar during the lift, and there is a world class powerlifter training in a flashy ‘fitness center’ (Beverly Crawford, two time high school national powerlifting champion, two time USA Powerlifting national champion and silver medalist at the International Powerlifting Federation world championships), you are correct…however not what I was going for.
Notice her right hand, circled in red. It appears that her wrist is bent sharply backwards. This is something I see done by the vast majority of bench pressers in the gym. To improve your grip on the bar, you want the bar to rest directly over your wrist and forearm. You do this by rolling your wrists forward, and letting the bar rest in the base of your palm, not up in the middle of your palm. The weight from the bar should travel directly down through your wrists and forearm, not suspended over…air.
If you use wrist wraps when you bench, use them to improve the stability of your hold on the bar. When you’re wrapping them, bring the wrap up around the base of your hand. When done right and tight, they act like a cast, and make it difficult to bend your hand backwards. This forces you to support the weight over your wrist and forearm.
If you look at Beverly’s left arm, circled in blue, look at the way her forearm is angled downward toward her feet. To get the most power, as mentioned above the bar should be positioned directly over your forearm. Now that we’ve fixed your grip on the bar, move the bar position up your chest so that your forearms are perpendicular to the floor as the bar touches the chest. You can also tuck your elbows in tighter to your body. This will allow you to bring the bar down lower on your chest and still keep the weight over your arms.
By making these two changes, you keep the weight of the bar directly over the supporting structure of your arms and chest. This should reduce strain on your wrists, elbows and shoulders, and also allow you to add lbs. to your bench press.
If you’d like more tips on bench pressing, check out my article, Powerlifting Basics: Tips to Increase Your Bench Press.
Adding Box Squats to your Strength Training
Posted: January 6, 2012 Filed under: 00 - Lifting Tips, 01 - Squat Tips | Tags: Box Squat Technique, Box Squats, Leg Strength, Muscle Building, Power, Powerlifting, Squat Technique, Squats, Strength Leave a comment »I was at the gym yesterday and watched a kid doing box squats. For the box, although the gym has a full set of plyo boxes, he was using a flat bench and doing touch and goes. Now unless you’re about seven feet tall, a bench is likely too high for box squats. In this case, his squats ended about three inches above parallel when he hit the bench.
There are actually several reasons to add box squats to your strength training, and your technique will differ slightly for each. When considering whether to use box squats in your training routine, you need to understand the purpose, and select the right technique.
- Learning to squat: If you’ve never squatted before, performing box squats can help you get comfortable sitting into your squat. To squat properly, you need to learn to sit into it just like you would sit into a chair. Using a box can give you a sense of security as you learn to sit back into the squat. When using the box squat to learn squat technique you should use little or no weight, and concentrate on controlling your descent so you land on the box lightly. Come to a full rest on the box before standing back up. Once you’re comfortable sitting into your squat you can move on to normal squats and work on loading up the bar.
- Touch and Go: The touch and go is used to help ‘find depth’. This form of box squats helps you find proper squat depth (thigh is below parallel). You do not come to full rest on the box when performing touch and goes. Descend until you feel the box then immediately drive back up. Once your comfortable hitting depth remove the box perform normal squats.
- Full Box Squats: Full box squats are a tool that can help build explosive power out of the bottom. When performing full box squats, descend until you come to a full rest on the box then drive explosively up off the box. Avoid leaning forward to begin the ascent as this can reduce the emphasis on your glutes and hams. As opposed to touch and goes full box squats can be used at any time as an alternative to normal squats. They are a great training tool to create strength at the bottom of your squat and build explosiveness out of the hole.
General Tips for Box Squats:
- Use a box that is the right height for appropriate squat depth. Do you really need a box to tell you your squats are high? I’ll help with that: “your squats are high”. Now suck it up and drop your squats into the hole.
- Never anticipate the box. Don’t squat to sit onto the box. Keep descending with proper squat technique until you hit the box then drive back up. If you are slightly surprised by hitting the box then you’re doing it right.
- Land lightly on the box. Descend in a controlled manner and land lightly on the box. Plopping down hard on the box with a loaded bar on your back is a sure way to end your lifting career.
- Unless you’re doing full box squats, once your squatting issue is resolved, move on to regular squats.
If you’re using the box squat because it’s in the latest edition of the Spartacus Leg Mauling training program, step back and assess why you’re using the box. If it’s a fit with your training goals, select the appropriate method and a box that will drop you into the hole.
From the Ref’s Chair: The Deadlift
Posted: December 5, 2011 Filed under: 03 - Deadlift Tips | Tags: Deadlift Technique, Deadlifts, Leg Strength, Power, Powerlifting, Strength 4 Comments »
I’ve learned a lot about being a better lifter by refereeing powerlifting meets. From the Ref’s Chair is my attempt to pass on what I see so that you can improve your lifts. This post is from the 2011 Fife Power Company Powerlifting Holiday Classic. I witnessed some great lifting, highlighted by a 722lb raw pull. Hopefully some of these tips will help you lift even bigger next year!
Grip: I’ll dig into your grip on the bar in more detail in another article; however I wanted to touch on some of the mistakes I saw. If you can’t hold onto the bar, you can’t pull the weight. You should be taking every measure you can to improve your grip.
- Thumbless grip: There is no reason to use a thumbless grip on the deadlift. If you can hold the bar thumbless, quite frankly you don’t have enough weight on the bar.
- Chalk: I saw a lifter fastening his belt after he’d chalked his hands. By the time he approached the bar to pull, the chalk was on his singlet and his belt, but not on his hands. As cool as you look covered in blood, sweat and chalk, chalk on your attire does not help you hold onto the bar. Chalking your hands should be the last thing you do before stepping onto the platform.
- Hand Placement – too wide: This one I see all the time – using an exceptionally wide grip on the bar. A wide grip creates two disadvantages for you. First, a wider grip shortens your arm span, meaning you start the pull closer to the floor. This increases the range of motion you must pull through, and puts you at a disadvantaged position to start the pull from. Secondly, you now have forces straining your grip in two directions – one straight down towards the floor, the second inward pulling your hands toward the neutral position. Whether you’re pulling sumo or conventional, your hands should hang straight down from your shoulders. This will lengthen your arm span to the bar to its maximum, and eliminate the horizontal force from straining your grip.
Hand placement too wide
Correct hand placement
- Hand Placement – too narrow: Not gripping the knurling. Unless you have an exceptionally small frame with narrow shoulders, you should try to grip the bar on the knurling.
Stance: Choose either a sumo stance or a conventional stance. I saw too many people taking a stance somewhere in between. There is no advantage to this. With an ‘in between’ stance you drag your hands across your legs through nearly the full range of motion, peeling your grip loose.
- Conventional: Your feet should be close together and toes pointed forward. Unless you have an exceptionally wide frame, your legs should be inside the knurling. With your feet in this position, your arms can hang straight down from the shoulders, grip the knurling, and not drag across your body as you complete your pull. Your legs and clothing won’t catch on the knurling which would increase the friction, and thereby increase the difficulty of the pull.
- Sumo: Although dependent on your build, a sumo stance is very wide, well outside shoulder width, with your toes pointed out. For my sumo setup, I place my feet so the 81cm rings in the knurling are at my shins. Your grip will be inside your legs, hang straight down from your shoulders, and optimally gripping the knurling. Your hand placement should be approximately the same for the sumo pull as for the conventional deadlift.
Setup: Don’t play around with the deadlift. A loaded bar sitting on the floor waiting for you to pull can be intimidating. If you take the time to think about it, your mind will talk you out of the lift. Grab the bar and pull – GRIP and RIP
- Pausing at the Bottom: Once you grip the bar, and drop your hips to the starting position, pull immediately. Sitting at the bottom works against you in two ways. First, as mentioned, you start thinking about the lift. Your mind will try to tell you how heavy the weight is. Secondly, as you drop your hips into the starting position, you should try to tighten your glutes and hamstrings and use them to explode off the floor. If you’re pausing at the bottom you lose that tightness and any advantage you can get out of it (ever notice how the second rep of deadlifts is much easier than the first when deadlifting for reps…?).
- Exhaling at the Bottom: Don’t exhale, grunt or scream as you start the pull. Losing the air from your chest will reduce your upper body stability. Try to hold the air in your chest until the bar passes your knees and then begin exhaling as you lock out.
If you would like a complete walkthrough of the conventional deadlift you can read my article on deadlifting technique.
Go Slow – Train Yourself to be Weak
Posted: November 29, 2011 Filed under: 00 - Lifting Tips | Tags: Lifting Technique, Power, Powerlifting, Strength, Training 8 Comments »I picked up a little flyer at one of the major gym chains the other day. It appears to be noob training advice for their 2012 Fitness Challenge. If I may quote:
GO SLOW
GO SLOW
Get the most out of each rep by contracting and releasing slowly. Aim for a 5-second count in each direction.
In which sport exactly do you train to function slowly? As a football coach are you going to train your offensive linemen to aim for five seconds to come off the line when the ball is snapped? The play will be over by the time he makes it out of his three point stance! Ok, that’s a bit generous, he’ll be flat on his CENSORED before he gets to 3…
Now, there are times and places to include slow-count work in your training program, but if you don’t know why you’re doing it, do yourself a huge favor – just don’t. This flyer spews one of the single worst pieces of training advice I’ve ever read (IMHBCO). I already spend far too much time training new lifters to speed up their lifts, and complete them explosively.
If I were to give advice to new lifters without knowing their training goals, I would go in the opposite direction:
- When learning a new exercise, perform it in a deliberate manner until you can perform it properly – deliberate does not mean SLOW, perform the movements only as slowly as needed to complete the exercise properly
- Control the bar throughout the range of motion on both the eccentric (downward portion of the lift) and concentric (upward portion of the lift) movements
- Lower the bar in a quick but controlled manner
- Raise the bar explosively, try to complete the concentric portion of the lift as powerfully as possible